24
Step Command
Remarks
terminated.
9.
Set the Web user
connection timeout time.
web idle-timeout
minutes
Optional.
10.
Set the size of the buffer for
Web login logging.
web logbuffer size
pieces
Optional.
11.
Create a local user and
enter local user view.
local-user
user-name
N/A
12.
Configure a password for
the local user.
password
{
cipher
|
simple
}
password
N/A
13.
Specify the command level
of the local user.
authorization-attribute level
level
N/A
14.
Authorize the local user to
use the Web service.
service-type
web
N/A
15.
Exit to system view.
quit
N/A
16.
Create a VLAN interface
and enter its view.
interface vlan-interface
vlan-interface-id
If the VLAN interface already exists, the
command enters its view.
You could replace this VLAN interface
with any other Layer 3 interface as
appropriate.
17.
Assign an IP address and
subnet mask to the
interface.
ip
address
ip-address
{
mask
|
mask-length
}
N/A
Displaying and maintaining Web login
Task Command
Remarks
Display information about Web
users.
display web users
[
|
{
begin
|
exclude
|
include
}
regular-expression
]
Available in any view.
Display HTTP state information.
display ip http
[
|
{
begin
|
exclude
|
include
}
regular-expression
]
Available in any view.
Display HTTPS state
information.
display ip https
[
|
{
begin
|
exclude
|
include
}
regular-expression
]
Available in any view.
HTTP login configuration example
Network requirements
As shown in
, configure the AP to allow the PC to log in over the IP network by using HTTP.