7–Installing Management Applications
Detailed Procedures
79
83840-546-00 D
Enable HTTPS
1.
If CIM server is not started, start it.
2.
Set up HTTPS port with the following command (optional):
cimconfig -s httpsPort=5989 -p
This property is not available for inbox OpenPegasus.
1.
Enable HTTPS connection with 'the following command:
cimconfig -s enableHttpsConnection=true -p
2.
Use the
cimserver -s
and
cimserver
commands, respectively, to stop
and restart CIM server for the new configuration to take effect.
Install QLogic CMPI Provider
Ensure that OpenPegasus is installed properly before installing CMPI Provider.
Install
Enter following command to install QLogic CMPI Provider.
% rpm -i QLGC_CMPIProvider-{version}.{arch}.rpm
Uninstall
Enter following command to uninstall QLogic CMPI Provider:
% rpm -e BRCM_CMPIProvider
Perform Linux Firewall Configuration, If Required
Follow these procedures to open the appropriate ports in the firewall:
RedHat
1.
Click
System
, select
Administration
, and then select
Firewall
.
2.
Select
Other Ports
.
3.
In the Port and Protocol Dialog box, select
User Defined
.
4.
In the
Port/Port Range
field, add the port number.
5.
In the
Protocol
field, add the protocol as TCP or UDP.
6.
Click
Apply
for the firewall rules to take effect.
Example:
For CIM-XML over HTTP, the port number is 5988 and protocol is TCP.
For CIM-XML over HTTPs, the port number is 5989 and protocol is TCP.
Summary of Contents for 8400 Series
Page 390: ......
