Chapter 8: Using the Command Line Interface
557
Modifying SNMPv3 Settings
There are different commands to modify the SNMPv3 parameters of a
specific user profile. You can combine all of the following commands to
modify the SNMPv3 parameters at a time. See
Multi-Command Syntax
(on page 617).
Enable or disable the SNMP v3 access to PX3 for the specified
user:
config:#
user modify <name> snmpV3Access <option1>
Variables:
<name> is the name of the user whose settings you want to change.
<option1> is one of the options:
enable or disable.
Option
Description
enable
Enables the SNMP v3 access permission for the
specified user.
disable
Disables the SNMP v3 access permission for the
specified user.
Determine the security level:
config:#
user modify <name> securityLevel <option2>
Variables:
<name> is the name of the user whose settings you want to change.
<option2> is one of the options:
noAuthNoPriv, authNoPriv or
authPriv.
Option
Description
noAuthNoPriv
No authentication and no privacy.
authNoPriv
Authentication and no privacy.
authPriv
Authentication and privacy.
Determine whether the authentication passphrase is identical to
the password:
Summary of Contents for PX3-3000 series
