X5368r-P3
User’s Manual Version 1.0
125
7.34
VoIP set tcpPort
7.34.1 Syntax
voip set tcpPort <portno>
7.34.2 Description
This command is used to configure the TCP port number
for use by SIP. MGCP does not use TCP.
SIP also listens on UDP, so you can also use the
command
voip set udpPort
to set the port number
for SIP connections over UDP.
7.34.3 Options
The following table gives the range of values for each
option which can be specified with this
command and a default value (if applicable):
Table 10-29:voip set sip tcpPort CLI command
7.34.4 Example
prompt>
voip set tcpPort 5000
X5368r-P3
User’s Manual Version 1.0
126
7.35
VoIP set udpPort
7.35.1 Syntax
voip set udpPort <portno>
7.35.2 Description
This command is used to configure the UDP port number
for SIP or MGCP. MGCP only uses UDP.
SIP also listens on TCP, so you can also use the
command
voip set tcpPort
to set the port number
for SIP connections over TCP.
7.35.3 Options
The following table gives the range of values for each
option which can be specified with this
command and a default value (if applicable):
Table 10-30:voip set sip udpPort CLI command
7.35.4 Example
prompt> voip set udpPort 5000
