130
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© Calix. All Rights Reserved.
Note:
See
Calix xDSL Best Practices
for a description of the physical layer factors that may
directly influence the quality of data and video services delivery, and recommendations for
the best practices necessary to achieve optimal results.
Applying multiple DSL templates to a single port
Each DSL template may specify some or all of the xDSL port parameters. When a DSL
template is applied to an xDSL port, the parameter values that are specified in that template
are copied into the port object.
If another template is subsequently applied to the same xDSL port, the parameter values
specified in that template are copied into the port object.
If the same parameters are specified in both templates, the values defined in the last-
applied template are applied to the xDSL port.
If parameters specified in the first-applied template are not specified in the last-applied
template, the values are retained from the first-applied template for those parameters.
To create a DSL port template
1.
On the Navigation Tree, click
E-Series
.
2.
Click
Template
>
DSL
.
3.
In the menu, click
Create
.
4.
In the Create DSL Port Template dialog box, enter a descriptive name for the template
(40 characters).
5.
Click Create.
For CLI:
create dsl-template <name>
To apply a DSL template to a port
1.
On the Navigation Tree, click the xDSL port on which you want to apply the DSL
template.
2.
Click
Provisioning
>
Basic
>
Action
>
Apply Template
.
3.
In the Template list, select from the list of previously-created DSL templates.
4.
Click
Apply Template
.
For CLI:
apply dsl-template <t-name> to-dsl-port <port>
clear dsl-template <name> [basic|advanced|psd]
