194
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© Calix. All Rights Reserved.
To apply a DSL Template to a port
You can modify multiple parameters with a single action of applying a DSL template to the
port, replacing the DSL port settings.
1.
On the Navigation Tree, click the xDSL port on which you want to apply the DSL
template.
2.
Click
Provisioning
>
Basic
>
Action
>
Apply Template
.
3.
In the Template list, select from the list of previously-created DSL templates.
4.
Click
Apply Template
.
For CLI:
apply dsl-template <t-name> to-dsl-port <port>
To modify the xDSL parameters to recommended values
1.
On the Navigation Tree, click the xDSL port of which you want to modify parameters.
2.
In the Workarea, click
Port
>
Provisioning
>
Basic
.
3.
Refer to the table above for the parameter descriptions and options and set the values as
necessary.
4.
Click
Apply
.
5.
In the Workarea, click
Port
>
Provisioning
>
Advanced
.
6.
Refer to the table above for the parameter descriptions and options and set the values as
necessary.
7.
Click
Apply
.
For CLI:
set dsl-port <port-id> advanced
set dsl-port <port-id> basic
set dsl-port <port-id> psd
show dsl-port [port]
[advanced|all|basic|inventory|psd|status|subcarriers]
Configuring an xDSL Port Associated Interface
This topic describes how to configure an xDSL port associated interface for service.
xDSL port associated interface parameters
You can provision the following parameters for an xDSL port associated interface:
