M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
236
Syntax
show gvrp
- shows whether GVRP is disabled, along with the current settings for the maximum
number of VLANs and the current Primary VLAN
Syntax
gvrp <enable|disable
>
- enable or disable GVRP
Syntax
show-vlan
– list all the VLANs (including dynamic VLANs) on the switch
Syntax
set-ports port=<port|list|range> state=<learn|block|disable>
- set the state of the port
to learn, block or disable for GVRP. Note the default state is disable
Syntax
static vlan=<VID>
- convert a dynamic VLAN to a static VLAN
Syntax
set-forbid vlan=<tag vlanid> forbid=<port-number|list|range>
- sets the forbid GVRP
capability on the ports specified
Syntax
show-forbid
– display the ports with GVRP forbid capabilities
Magnum6K25#
gvrp
Magnum6K25(gvrp)#
show gvrp
GVRP Status : Enabled
Magnum6K25(gvrp)##
gvrp disable
GVRP is now disabled
Magnum6K25(gvrp)##
gvrp enable
GVRP enabled
Magnum6K25(gvrp)##
show-vlan
============================================
VLAN ID
| NAME
| VLAN
STATUS
============================================
1
| Default VLAN | Static
Active
2
| Blue
| Static
Active
10
| dyn10
| Dynamic
Active
Magnum6K25(gvrp)##
static vlan=10
Magnum6K25(gvrp)##
show-vlan
============================================
VLAN ID
| NAME
| VLAN
STATUS
============================================
1
| Default VLAN | Static
Active
2
| Blue
| Static
Active
10
| dyn10
| Static
Active
