manualshive.com logo in svg

Silicon Laboratories EFM8SB2, Reference Manual

The Silicon Laboratories EFM8SB2 is a versatile microcontroller with rich features. Unlock its full potential by downloading the comprehensive Reference Manual, available for free at our website. Ideal for developers, this manual provides detailed instructions and insights on maximizing the performance of this exceptional product.

Share
Download
background image

13.2  Features

• Up to 22 external inputs.
• Single-ended 10-bit mode.
• Supports an output update rate of 300 ksps samples per second.
• Operation in low power modes at lower conversion speeds.
• Asynchronous hardware conversion trigger, selectable between software, external I/O and internal timer sources.
• Output data window comparator allows automatic range checking.
• Support for burst mode, which produces one set of accumulated data per conversion-start trigger with programmable power-on set-

tling and tracking time.

• Conversion complete and window compare interrupts supported.
• Flexible output data formatting.
• Includes an internal 1.65 V fast-settling reference and support for external reference.
• Integrated temperature sensor.

13.3  Functional Description

13.3.1  Clocking

The  ADC  is  clocked  by  an  adjustable  conversion  clock  (SARCLK).  SARCLK  is  a  divided  version  of  the  selected  system  clock  when
burst mode is disabled (ADBMEN = 0), or a divided version of the LPOSC0 oscillator when burst mode is enabled (ADBMEN = 1). The
clock divide value is determined by the AD0SC field. In most applications, SARCLK should be adjusted to operate as fast as possible,
without exceeding the maximum electrical specifications. The SARCLK does not directly determine sampling times or sampling rates.

13.3.2  Voltage Reference Options

The voltage reference multiplexer is configurable to use a number of different internal and external reference sources. The ground ref-
erence  mux  allows  the  ground  reference  for  ADC0  to  be  selected  between  the  ground  pin  (GND)  or  a  port  pin  dedicated  to  analog
ground  (AGND).  The  voltage  and  ground  reference  options  are  configured  using  the  REF0CN  register.  The  REFSL  field  selects  be-
tween the different reference options, while GNDSL configures the ground connection.

13.3.2.1  Internal Voltage Reference

The high-speed internal reference is self-contained and stabilized. It is not routed to an external pin and requires no external decou-
pling. When selected, the internal reference will be automatically enabled/disabled on an as-needed basis by the ADC. The reference is
nominally 1.65 V.

13.3.2.2  Precision Voltage Reference

The precision voltage reference is nominally 1.68 V and routed to the VREF pin for decoupling purposes. The precision reference is
enabled by setting REFOE to 1. An external capacitor of at least 0.1 μF is recommended when using the precision voltage reference.
To use the reference in conjunction with the ADC, the REFSL field should be set to the VREF pin setting.

13.3.2.3  Supply or LDO Voltage Reference

For applications with a non-varying power supply voltage, using the power supply as the voltage reference can provide the ADC with
added dynamic range at the cost of reduced power supply noise rejection. Additionally, the internal 1.8 V LDO supply to the core may
be used as a reference. Neither of these reference sources are routed to the VREF pin, and do not require additional external decou-
pling.

13.3.2.4  External Voltage Reference

An external reference may be applied to the VREF pin. Bypass capacitors should be added as recommended by the manufacturer of
the external voltage reference. If the manufacturer does not provide recommendations, a 4.7 µF in parallel with a 0.1 µF capacitor is
recommended.

Note: 

The VREF pin is a multi-function GPIO pin. When using an external voltage reference, VREF should be configured as an analog

input and skipped by the crossbar.
 

EFM8SB2 Reference Manual

Analog-to-Digital Converter (ADC0)

silabs.com

 | Smart. Connected. Energy-friendly.

Rev. 0.1  |  127

Summary of Contents for EFM8SB2






























































































































































































































































































Reviews:

No comments

Related manuals for EFM8SB2

OJ Electronics EFR Series Instructions Manual preview
EFR Series
Brand: OJ Electronics Pages: 8
OJ Electronics ETO2 Manual preview
ETO2
Brand: OJ Electronics Pages: 112
OJ EFS Series Instructions Manual preview
EFS Series
Brand: OJ Pages: 17
Zamel ROW-01 Quick Manual preview
ROW-01
Brand: Zamel Pages: 2
IDTECK Star RFL200 Quick Manual preview
Star RFL200
Brand: IDTECK Pages: 12
Banner XS26-2 Series Manual preview
XS26-2 Series
Brand: Banner Pages: 2
Eaton CGLine+ Web Controller Installation And Operating Instructions Manual preview
CGLine+ Web Controller
Brand: Eaton Pages: 28
tbs electronics Omnicharge Solar OCS 100-20 Installation Manual preview
Omnicharge Solar OCS 100-20
Brand: tbs electronics Pages: 64
Objective Imaging OASIS-4i Installation Manual preview
OASIS-4i
Brand: Objective Imaging Pages: 11
Cypress Semiconductor CY8CKIT-015 Manual preview
CY8CKIT-015
Brand: Cypress Semiconductor Pages: 36
Gardenic GN-1113 User Manual preview
GN-1113
Brand: Gardenic Pages: 14
THOR THPWM-30 Instruction Manual preview
THPWM-30
Brand: THOR Pages: 12
adept technology sDIO User Manual preview
sDIO
Brand: adept technology Pages: 96
BFT COMPASS SC-RS 232 Installation And User Manual preview
COMPASS SC-RS 232
Brand: BFT Pages: 24
Oase StreamMax Pump Controller Operating Instructions Manual preview
StreamMax Pump Controller
Brand: Oase Pages: 142
DELTA DORE TYBOX 1010 WT User Manual preview
TYBOX 1010 WT
Brand: DELTA DORE Pages: 9
Thermal Solutions Boiler Control TSBC Instruction Manual preview
Boiler Control TSBC
Brand: Thermal Solutions Pages: 48
Kapego LED R-DMX 3+1 Manual preview
R-DMX 3+1
Brand: Kapego LED Pages: 12

Brands by name

Popular brands

Load more brands