© 2003 - 2005 Sipura Technology, Inc
Proprietary (See Copyright Notice on Page 2)
105
PSTN-To-VoIP
Gateway Enable
Enable or disable PSTN-To-VoIP Gateway
functionality. If set to “no”, gateway is disabled but
PSTN calls still ring through Line 1 (if <PSTN Ring
Thru Line 1> is enabled)
yes Bool
PSTN CID For
VoIP CID
If set to “yes”, the outbound VoIP call will assume the
caller-id of the PSTN caller, if PSTN caller ID is
available. Otherwise, the PSTN Line’s VoIP account
information is used. The PSTN Caller ID is after the
application of <PSTN CID Name Prefix> and <PSTN
CID Number Prefix>
yes Bool
PSTN CID Number
Prefix
A prefix to prepend to the PSTN caller ID number
when ringing through Line 1 or used in outbound
VoIP call. Note that most caller-id devices can only
display 0-9.
[blank] Str7
PSTN CID Name
Prefix
A prefix to prepend to the PSTN caller ID name when
ringing through Line 1 or used in outbound VoIP call.
[blank] Str7
PSTN Caller Auth
Method
Method to be used to authenticate a PSTN Caller for
VoIP gateway services. Choose from {none, PIN}
none Choice
PST PIN Max
Retry
Number of trials to allow a PSTN Caller to enter a
valid PIN number.
3
1 – 10
PSTN Ring Thru
Line 1
If enabled, incoming calls will also ring Line 1 (after a
delay as specified in <PSTN Ring Thru Delay>).
Hence the Line 1 user can accept call waiting from
the PSTN side. The caller-id from the PSTN service,
if available, will be passed onto Line 1 also when
ringing through (For this to work, the ring through
delay must be set long enough such that PSTN
caller-id is completely decoded before ring thru Line
1 starts).
yes Bool
PSTN Caller
Default DP
Index of the dial plan in the dial plan pool to be used
for the PSTN caller who does not require
authentication (when authentication method is none,
or when the caller’s number is in the access list).
Choose from {1, 2, 3, 4, 5, 6, 7, 8}
1 Choice
PSTN Caller ID
Pattern
A comma separated list of caller number templates
such that PSTN callers with numbers not matching
any of these templates will be rejected for VoIP
gateway service regardless of the setting of the
authentication method. The comparison is applied
before access list is applied. If this parameter is blank
(not specified), all callers will be considered for VoIP
gateway service. The PSTN service must include
Type I Caller-ID Delivery Service for this feature to
work properly. If caller-id is blocked or not available,
the caller-id is assumed to be “Anonymous”.
For example: 1408*, 1512???1234, Anonymous
[blank] Str127
PSTN Access List
A comma separated list of caller number templates
such that PSTN callers with numbers matching any
of these templates will be accepted for VoIP gateway
service without authentication.
[blank] Str127
PSTN Caller 1 PIN
The first of 8 PIN numbers for authenticating PSTN
callers to obtain VoIP gateway services. The PSTN
[blank] Str31
