© 2003 - 2005 Sipura Technology, Inc
Proprietary (See Copyright Notice on Page 2)
77
Block CID Setting
Block Caller ID on/off for all calls
Bool
No
Block ANC Setting
Block Anonymous Calls on or off
Bool
No
DND Setting
DND on or off
Bool
No
CID Setting
Caller ID Generation on or off
Bool
Yes
CWCID Setting
Call Waiting Caller ID Generation on or off
Bool
Yes
Dist Ring Setting
Distinctive Ring on or off
Bool
Yes
Secure Call Setting
If yes, all outbound calls are secure calls by default
Bool
No
Message Waiting
This is updated when there is voice mail notification
received by the SPA. The user can also manually
modify it to clear or set the flag. Setting this value to
"yes" can activate stutter tone and VMWI signal.
This parameter is stored in long term memory and
will survive after reboot or power cycle
Bool No
3.5.8.4. Distinctive Ring and Ring Settings
Parameter Name
Description
Type
Default
Ring 1 Caller
Caller number pattern to play Distinctive Ring/CWT 1
PhTmplt
Ring 2 Caller
Caller number pattern to play Distinctive Ring/CWT 2
PhTmplt
Ring 3 Caller
Caller number pattern to play Distinctive Ring/CWT 3
PhTmplt
Ring 4 Caller
Caller number pattern to play Distinctive Ring/CWT 4
PhTmplt
Ring 5 Caller
Caller number pattern to play Distinctive Ring/CWT 5
PhTmplt
Ring 6 Caller
Caller number pattern to play Distinctive Ring/CWT 6
PhTmplt
Ring 7 Caller
Caller number pattern to play Distinctive Ring/CWT 7
PhTmplt
Ring 8 Caller
Caller number pattern to play Distinctive Ring/CWT 8
PhTmplt
Default Ring
Default ringing pattern, 1 – 8, for all callers
{1,2,3,4,5
,6,7,8}
1
Default CWT
Default CWT pattern, 1 – 8, for all callers
{1,2,3,4,5
,6,7,8}
2
Hold Reminder Ring
Ring pattern for reminder of a holding call when the
phone is on-hook
{1,2,3,4,5
,6,7,8,
None}
None
Call Back Ring
Ring pattern for call back notification
{1,2,3,4,5
,6,7,8}
None
Cfwd Ring Splash
Len
2
Duration of ring splash when a call is forwarded
(0 – 10.0s)
Time3 0
Cblk Ring Splash
Len
2
Duration of ring splash when a call is blocked (0 –
10.0s)
Time3 0
VMWI Ring Splash
Len
Duration of ring splash when new messages arrive
before the VMWI signal is applied (0 – 10.0s)
Time3 .5
VMWI Ring Policy
The parameter controls when a ring splash is played
when a the VM server sends a SIP NOTIFY message
to the SPA indicating the status of the subscriber’s
mail box. 3 settings are available:
New VM Available – ring as long as there is 1 or more
unread voice mail
New VM Becomes Available – ring when the number
of unread voice mail changes from 0 to non-zero
New VM Arrives – ring when the number of unread
voice mail increases
Choice New
VM
Available
Ring On No New VM If enabled, the SPA will play a ring splash when the
VM server sends SIP NOTIFY message to the SPA
Bool No
