46
Example 1�
If the set user code is the default 1234 and you want to set the value of Tsup to 35�6°C, send the
following SMS:
1234.ATEMP.AT1.35,6
Example 2�
If the set user code is the default 1234 and you want to set the value of Tsup to 34°C, send the
following SMS:
1234.ATEMP.AT1.34
13.6.2.3 Associating the alarm with the telephone numbers where the SMS message is to be sent
This setting enables associating the SMS alarm message with up to 8 telephone numbers to which
the message must be sent�
The procedure requires no response from the chronothermostat 01913�
Send the following SMS message:
<user code>.SMSAT1.NUM.<n1...n8>
where
<n1...n8>
is the list of indices of the phone numbers for associating the SMS alarm message
for the measured temperature being greater than Tsup�
Example�
If the set user code is the default 1234 and you want to associate the SMS alarm message for the
measured temperature being greater than the threshold value Tsup with the phone numbers of index
1, 2 and 5, send the following SMS:
1234.SMSAT1.NUM.125
To read the associations between all the types of alarm messages and telephone numbers, send the
following SMS:
<user code>.?SMS
The chronothermostat 01913 will send a response SMS message with the list of all the associations
between the phone numbers and the types of SMS alarm messages:
GSM-01913 1/1
SMSAI: <list of associated phone number indices>
SMSAR: <list of associated phone number indices>
SMSAT1: <list of associated phone number indices>
SMSAT0: <list of associated phone number indices>
For the examples, please see paragraph 13�6�1�5 on page 39�
