51
13.6.3.2 Setting the lower temperature threshold
This option is used to set the value of the lower threshold Tinf�
To enable it, send the following SMS message:
<user code>.ATEMP.AT0.XX,X
where
XX.X
represents the value of Tinf to enter; the possible values to set must lie in the range
between 0°C and 40°C�
Note:
No response SMS message is required from the chronothermostat 01913�
Example 1�
If the set user code is the default 1234 and you want to set the value of Tinf to 2�6°C, send the
following SMS:
1234.ATEMP.AT0.2,6
Example 2�
If the set user code is the default 1234 and you want to set the value of Tinf to 3°C, send the
following SMS:
1234.ATEMP.AT0.3
13.6.3.3 Associating the alarm with the telephone numbers where the SMS message is to be sent
This setting enables associating the SMS alarm message with up to 8 telephone numbers to which
the message must be sent�
The procedure requires no response from the chronothermostat 01913�
Send the following SMS message:
<user code>.SMSAT0.NUM.<n1...n8>
where
<n1...n8>
is the list of indices of the phone numbers for associating the SMS alarm message
for the measured temperature being less than Tinf�
Example�
If the set user code is the default 1234 and you want to associate the SMS alarm message for the
measured temperature being less than the threshold value Tinf with the phone numbers of index 1, 2
and 5, send the following SMS:
1234.SMSAT0.NUM.125
To read the associations between all the types of alarm messages and telephone numbers, send the
following SMS:
<user code>.?SMS
