63
13.7.7 Reading auxiliary output status
This function allows viewing the current status (on or off) of the auxiliary output�
The SMS message to send is the following one:
<user code>.R1.STATO
The chronothermostat will send an SMS reply message with the following format:
GSM-01913 1/1
<label R1>:ON/OFF
Example�
If the set user code is the default 1234 and:
- the SMS label of the auxiliary output has been set as “staircase lights”;
- the auxiliary output is on�
On sending the SMS message:
1234.R1.STATO
The chronothermostat 01913 will send the following SMS response message:
GSM-01913 1/1
staircase light:ON
13.8 REMOTE CONTROL OF THE CHRONOTHERMOSTAT SETTINGS
With simple SMS messages, remote control is possible for all the HVAC settings (operating mode,
programs, temperature levels, etc�) of the GSM chronothermostat�
13.8.1 Customizing the SMS label for the chronothermostat
This setting enables defining a text to associate with the chronothermostat; to be used as an
alternative to the default label C1 in the SMS command messages�
For setting the chronothermostat SMS label send the following SMS message:
<user code>.C1.STR.<text>
where
<text>
is the description to associate with the input (max 20 characters)�
Note
: No response SMS message is required from the chronothermostat 01913; do not use the “
.
”
and “
/
” characters�
Example�
If the set user code is the default 1234 and you want to associate the “kitchen” name with the
chronothermostat, send the following SMS message:
1234.C1.STR.kitchen
