manualshive.com logo in svg

3Com 3CR15600 - Enterprise Management Suite, Getting Started Manual

The 3Com 3CR15600 - Enterprise Management Suite offers an advanced solution for streamlined network management. To ensure a hassle-free setup, download the comprehensive Getting Started Manual from 88.208.23.73:8080, where you can access and download this manual for free. Get started with this powerful product today!

Share
Download
background image

EMS CLI Client

209

For example:
user123>server stop /f
Signaled server to stop

user123>Server signal: The server shutdown. You will have to login again 
later.

This is considered normal operation, indicating that you have successfully 
stopped the EMS server.

You can also use the CLI client to issue one line commands without 
bringing up an interactive session. For example, to shutdown a server that 
is running as a daemon or a background process, a user can issue the 
following command: 

runCLIClient server stop /f

This command executes the 

server stop /f

 command without starting the 

CLI client. Use this option to automate server interaction (for example, 
collecting statistics and issuing commands) or to issue stop commands in 
system scripts while a system is rebooting or going down.

EMS CLI Client

If you are running the EMS server as a daemon, this list changes.

Table 50

 lists the EMS CLI client console commands.

Table 50   

EMS CLI Client Commands 

Command

Function

?

shows help for the EMS CLI

db export fileName

export the database with 

fileName

docSchema

document the schema

exit

exit the CLI

find mib ojectName

displays definition of 

objectName

help

shows help for the EMS CLI

host hostName

resolve 

hostName

inventory [packageName]

displays package inventory

logout userID

force 

userID

 to be logged off

mail recipient

send short e-mail test message to recipient

property [name [value]]

show/set server property value

(continued)

Summary of Contents for 3CR15600 - Enterprise Management Suite



























































































































































































































Reviews:

No comments

Related manuals for 3CR15600 - Enterprise Management Suite

Canon PowerShot A530 Software User'S Manual preview
PowerShot A530
Brand: Canon Pages: 153
Canon PowerShot A420 Software User'S Manual preview
PowerShot A420
Brand: Canon Pages: 132
Canon PowerShot A460 Using Manual preview
PowerShot A460
Brand: Canon Pages: 135
Canon MultiPASS C50 Software User'S Manual preview
MultiPASS C50
Brand: Canon Pages: 198
Canon PowerShot A530 Software Starter Manual preview
PowerShot A530
Brand: Canon Pages: 98
ScanSoft DRAGON NATURALLYSPEAKING 7 User Manual preview
DRAGON NATURALLYSPEAKING 7
Brand: ScanSoft Pages: 222
MACROMEDIA ClusterCATS Use Manual preview
ClusterCATS
Brand: MACROMEDIA Pages: 156
Amazon VBA Manual preview
VBA
Brand: Amazon Pages: 60
HP EliteBook 8460W Quickspecs preview
EliteBook 8460W
Brand: HP Pages: 41
HP Elite 7300 Microtower Illustrated Parts & Service Map preview
Elite 7300 Microtower
Brand: HP Pages: 4
HP MultiSeat ms6000 Hardware Reference Manual preview
MultiSeat ms6000
Brand: HP Pages: 63
HP EliteBook 8560p Brochure preview
EliteBook 8560p
Brand: HP Pages: 4
HP Elitebook 8560W Getting Started preview
Elitebook 8560W
Brand: HP Pages: 74
HP Fabric OS 7.0.0 Troubleshooting Manual preview
Fabric OS 7.0.0
Brand: HP Pages: 138
HP Evo D510 e-pc Technical Reference Manual preview
Evo D510 e-pc
Brand: HP Pages: 50
HP EliteBook 2560p Specifications preview
EliteBook 2560p
Brand: HP Pages: 34
HP FTAM/9000 Reference Manual preview
FTAM/9000
Brand: HP Pages: 102
HP NAS 1200s Release Note preview
NAS 1200s
Brand: HP Pages: 16

Brands by name

Popular brands

Load more brands