manualshive.com logo in svg

D-Link DWS-3160-24TC, Cli Reference Manual

The D-Link DWS-3160-24TC is a powerful network switch designed for seamless connectivity and efficient network management. This high-performance product offers advanced features and robust capabilities. To access its comprehensive manual and datasheet, visit our website and download them for free, empowering you with valuable information for optimal usage.

Share
Download
background image

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide 

830 

 

condition will use. 

<int 0-65535>

 - Enter the custom destination Layer 4 port number used here. This 

value must be between 0 and 65535. 

protocol

 - Specifies the protocol to filter for a named IP ACL rule, identified by number. The 

protocol number is a standard value assigned by IANA and is interpreted as an integer 
from 1 to 255. You can use the protocol number or you Specifies a protocol keyword. 

ip

 - Specifies that the protocol, used to filter for a named IP ACL rule, is IP. 

icmp

 - Specifies that the protocol, used to filter for a named IP ACL rule, is ICMP. 

igmp

 - Specifies that the protocol, used to filter for a named IP ACL rule, is IGMP. 

tcp

 - Specifies that the protocol, used to filter for a named IP ACL rule, is TCP. 

udp

 - Specifies that the protocol, used to filter for a named IP ACL rule, is UDP. 

other

 - Specifies a custom protocol number to use in the named IP ACL rule. 

<int 1-255>

 - Enter the custom protocol number, used to filter for a named IP ACL rule, 

here. This value must be between 1 and 255. 

service

 - Specifies the Service Type match condition for the named IP ACL rule. 

ip_precedence

 - Specifies the IP precedence field in a packet that is defined as the high-

order three bits of the Service Type octet in the IP header. 

<value 0-7>

 - Enter the IP precedence value used here. This value must be between 0 and 

7. 

ip_tos

 - Specifies the IP ToS field in a packet that is defined as all eight bits of the Service 

Type octet in the IP header. The ToS Bits value is a two-digit hexadecimal number from 00 
to ff. The TOS Mask value is a two-digit hexadecimal number from 0x00 to 0xff, 
representing an inverted mask. The zero-valued bits in the ToS Mask denote the bit 
positions in the ToS bits value that are used for comparison against the IP ToS field of a 
packet.  

tos_bit

 - Specifies the ToS Bit value. 

<hex 0x00-0xff>

 - Enter the ToS Bit value used here. This value must be between 0x00 

and 0xff. 

tos_mask

 - Specifies the ToS Mask value. 

<hex 0x00-0xff>

 - Enter the ToS Mask value used here. This value must be between 

0x00 and 0xff. 

ip_dscp

 - Specifies the IP DiffServ Code Point (DSCP) field. The DSCP is defined as the 

high-order six bits of the Service Type octet in the IP header. The IP DSCP is configured 
by a possible selection of one of the DSCP keywords or a numerical values. 

af11

 - Specifies that the IP DiffServ Code Point value will be set as 'af11'. 

af12

 - Specifies that the IP DiffServ Code Point value will be set as 'af12'. 

af13

 - Specifies that the IP DiffServ Code Point value will be set as 'af13'. 

af21

 - Specifies that the IP DiffServ Code Point value will be set as 'af21'. 

af22

 - Specifies that the IP DiffServ Code Point value will be set as 'af22'. 

af23

 - Specifies that the IP DiffServ Code Point value will be set as 'af23'. 

af31

 - Specifies that the IP DiffServ Code Point value will be set as 'af31'. 

af32

 - Specifies that the IP DiffServ Code Point value will be set as 'af32'. 

af33

 - Specifies that the IP DiffServ Code Point value will be set as 'af33'. 

af41

 - Specifies that the IP DiffServ Code Point value will be set as 'af41'. 

af42

 - Specifies that the IP DiffServ Code Point value will be set as 'af42'. 

af43

 - Specifies that the IP DiffServ Code Point value will be set as 'af43'. 

be

 - Specifies that the IP DiffServ Code Point value will be set as 'be'. 

cs0

 - Specifies that the IP DiffServ Code Point value will be set as 'cs0'. 

cs1

 - Specifies that the IP DiffServ Code Point value will be set as 'cs1'. 

cs2

 - Specifies that the IP DiffServ Code Point value will be set as 'cs2'. 

cs3

 - Specifies that the IP DiffServ Code Point value will be set as 'cs3'. 

cs4

 - Specifies that the IP DiffServ Code Point value will be set as 'cs4'. 

cs5

 - Specifies that the IP DiffServ Code Point value will be set as 'cs5'. 

cs6

 - Specifies that the IP DiffServ Code Point value will be set as 'cs6'. 

cs7

 - Specifies that the IP DiffServ Code Point value will be set as 'cs7'. 

ef

 - Specifies that the IP DiffServ Code Point value will be set as 'ef'. 

other

 - Specifies that a custom IP DiffServ Code Point value will be used. 

<int 0-63>

 - Enter a custom IP DiffServ Code Point value here. This value must be 

between 0 and 63. 

del_rule

 - Specifies to delete a specified rule from a named IP ACL. 

Summary of Contents for DWS-3160-24TC
























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DWS-3160-24TC

IBM E12 Quick Installation Manual preview
E12
Brand: IBM Pages: 2
Fairchild FSD200 Manual preview
FSD200
Brand: Fairchild Pages: 14
H3C S5500-SI Series Configuration Manual preview
S5500-SI Series
Brand: H3C Pages: 130
H3C S5500-EI series Irf Command Reference preview
S5500-EI series
Brand: H3C Pages: 19
H3C S5500-EI series Quick Start Manual preview
S5500-EI series
Brand: H3C Pages: 91
H3C S5500-EI series Operation Manual – Port Security preview
S5500-EI series
Brand: H3C Pages: 24
H3C S5500-EI series Installation Manual preview
S5500-EI series
Brand: H3C Pages: 69
H3C S5120-SI Series Quick Start Manual preview
S5120-SI Series
Brand: H3C Pages: 4
H3C S5120-SI Series Command Reference Manual preview
S5120-SI Series
Brand: H3C Pages: 209
H3C S5120-SI Series Installation Manual preview
S5120-SI Series
Brand: H3C Pages: 70
H3C S5120-EI Series Irf Command Reference preview
S5120-EI Series
Brand: H3C Pages: 32
H3C S1526 User Manual preview
S1526
Brand: H3C Pages: 83
H3C S10500 Series Configuration Manual preview
S10500 Series
Brand: H3C Pages: 26
H3C S5500-SI Series Command Manual preview
S5500-SI Series
Brand: H3C Pages: 6
Gefen EXT-DVI-441DL User Manual preview
EXT-DVI-441DL
Brand: Gefen Pages: 31
ORiNG IGS-1082GP Quick Installation Manual preview
IGS-1082GP
Brand: ORiNG Pages: 2
Theben TIMEGUARD WF10COM Installation & Operating Instructions Manual preview
TIMEGUARD WF10COM
Brand: Theben Pages: 35
LEGRAND Raritan Dominion LX II Quick Setup Manual preview
Raritan Dominion LX II
Brand: LEGRAND Pages: 7

Brands by name

Popular brands

Load more brands