219
4.10. Port Group Configuration
Configure port grouping in "Global configuration mode." If a port group is configured, ports
designated as members of the port group can communicate only among member ports in the
same group. Each port can be assigned to multiple port groups. Confirm the configuration information
by executing the "show port-group" command in "Privileged mode."
Command to show the port group information
M24eG# show
port-group
Command to configure port grouping
M24eG(config)#
port-group <ID> name <Name> member <Portlist>
Command to enable port grouping
M24eG(config)#
port-group <ID> enable
Command to disable port grouping
M24eG(config)#
no port-group <ID> enable