233
<Configuration Example>
Overview: Transfer the current configuration information to a TFTP server whose IP address
is 192.168.1.1, specifying the file name as "switch-1.cfg".
(To cancel the TFTP transfer process, press Ctrl+C during transfer.)
Fig. 6-1 Example of transferring the configuration information
(this Switching Hub
TFTP server)
<Configuration Example>
Overview: Reflect the configuration file on a TFTP server to this Switching Hub.
(1) Retrieve the configuration file "switch-2.cfg" from a TFTP server whose IP address
is 172.16.1.1.
(2) Save the retrieved configuration information. (For details, refer to chapter 11.)
(To cancel the TFTP transfer process, press Ctrl+C during transfer.)
Fig. 6-2 Example of transferring the configuration information
(TFTP server
this Switching Hub)
Note:
The configuration information is not automatically saved in this Switching Hub just
by retrieving the configuration file from the TFTP server. Make sure to save the
configuration information.
M24eG> enable
M24eG# copy running-config tftp 192.168.1.1 switch-1.cfg
M24eG#
(1)
(2)
M24eG> enable
M24eG# copy tftp 172.16.1.1 switch-2.cfg running-config
M24eG# copy running-config startup-config
Configuration saved to startup_config
M24eG#