140
<Configuration Example 2>
Overview: Delete VLAN10 created in Configuration Example 1.
(1) Move to the interface configuration mode for VLAN10.
(2) Delete member ports.
(3) Move to the global configuration mode.
(4) Move to the interface configuration mode for Ports 1 and 2.
(5) Set PVID to 1. (Factory-set PVID)
(6) Confirm that VLAN-ID 10 has been deleted.
Fig. 4-1-3 Example of the VLAN deletion configuration
Fig. 4-1-4 Example of the VLAN deletion confirmation
* If "VLAN<10> not available!" is displayed, the VLAN10 deletion is completed.
M24eG> en
M24eG# configure
M24eG(config)# interface vlan10
M24eG(config-if)# member
M24eG(config-if)# exit
M24eG(config)# interface gi0/1-2
M24eG(config-if)# pvid 1
M24eG(config-if)# exit
M24eG(config)# exit
M24eG#
(1)
M24eG# show vlan 10
NOTE -- 'U' : Untagged port member
'T' : Tagged port member
'-' : Not a port member
VLAN-ID|Status |Name
Port No. |1234|5678|9012|3456|7890|1234
------- ---------- ---- ---- ---- ---- ---- ----
VLAN<10> not available!
M24eG#
(2)
(3)
(4)
(5)
(6)