3 – Virtual I/O Command Line Interface
Groups and Commands
3-24
D000025-002 Rev. A
S
Options:
Sample Output:
fcDiscoveredDeviceConfig
Configure Fibre Channel devices that have been discovered.
Syntax:
Options:
Sample Output:
fcConfiguredDeviceRem
Remove a Fibre Channel target device from the configured list.
Syntax:
Options:
Index
Optional index of the device from the configured device list.
-> fcConfiguredDevicesGet
Ref# NodeWWN PortWWN Port# NPortId COS ConnectStatus Name
1 0x20000004CF8C02E7 0x22000004CF8C02E7 1 0x0106d1 3 Connected 2e7
p1
2 0x50060E801042B920 0x50060E801042B920 1 0x0108ef 3 Connected
Hitachi P1 via p1
3 0x50060E801042B920 0x50060E801042B920 3 0x0108ef 3 Connected
hitachi p1 via p3
4 0x50060E801042B920 0x50060E801042B920 4 0x0108ef 3 Connected
hitachi p1 via p4
fcDiscoveredDeviceConfig [Device Index] [Name]
Device Name
The index number from the discovery list.
Name
The Fibre Channel target device name.
-> fcDiscoveredDeviceConfig 27 "e31 p6"
Configuring discovered FC device 27 as (e31 p6)
fcConfiguredDeviceRem [Device Index]
Device Index
The index number from the configured Fibre Channel target device list.
