2 – Switch Command Line Interface
Groups and Commands
D000025-002 Rev. A
2-63
A
Valid RATE values are 2(2.5GB), 3(10GB), 4(30GB), 5(5GB), 6(20GB),
7(40GB), 8(60GB), 9(80GB), 10(120GB)
Valid Values for SL are 0 to 0xF
Valid Values for QKEY are 0 to 0xFFFFFFFF
Valid Values for FlowLabel are 0 to 0xFFFFF
Valid Values for TClass are 0 to 0xff
NOTE:DO NOT CREATE THIS GROUP WITH PARAMETERS THAT YOUR
FABRIC CANNOT SUPPORT!
smGidPrefix
Set the Subnet Prefix (default=0xfe80000000000000).
Syntax:
Options:
Sample Output:
NOTES:
Use this command to set the subnet prefix of the SM. The SM must be
offline and the subnet prefix value is 8 byte hex.
smSubnetSize
Set/display the subnet size for the subnet manager.
Syntax:
Options:
smGidPrefix [prefix]
prefix
The prefix to use when assigning GIDs to nodes.
-> smGidPrefix
Subnet Prefix: 0xfe80000000000001
smSetSubnetSize subnetSize
subnetSize
The number of end ports on the subnet; must be between 40 and 288, inclusive.
