3 – Virtual I/O Command Line Interface
Groups and Commands
D000025-002 Rev. A
3-43
A
Sample Output:
NOTE:
The virtual port must be inactive for the assignment to be successful.
Use port zero to unassign a virtual port.
fcVirtPortStatusSet
Activates or deactivates the virtual port.
Syntax:
Options:
Sample Output:
NOTE:
The virtual port must have an assigned physical port in order to be activated.
fcVirtPortPoolCreate
Create the Virtual Port Pool from the feature key.
Syntax:
Options:
-> fcVirtPortPhyPortSet 1 2
Index | VirtPort WWN | PhyPort | Status | VirtPort Name
--------------------------------------------------------------------------
0001 | 500066A0E2000199 | 2 | Inactive | WWN-0001
fcVirtPortStatusSet <Index> <Status>
Index
The index from the Virtual Port list.
Status
A=Active, I=Inactive
-> fcVirtPortStatusSet 1, 1
Index | WWN | Alias | PhyPort | Status | Name
------------------------------------------------------------------------
0001 | 0x500066A0E2000199 | Ext-1 | 1 | Active | Test-0001
fcVirtPortPoolCreate <KeyString>
KeyString
Encoded feature key to enable the Virtual Port Pool.
