2 – Switch Command Line Interface
Groups and Commands
D000025-002 Rev. A
2-93
A
Sample Output:
NOTE:
This command works only on chassis supporting 12X link
aggregation. This command enables 12X link aggregation so that
internal switching will be 12X. External ports remain configured to
4X and do not require special cabling configuration to function
correctly. Using this function without the option enable12xBit displays
current values of a port. A reboot is required to activate changes
made with this command.
ismChassisSetMtu
Allows the user to view, set and unset the chassis maximum packet MTU Capability and VL Capability
for all ports.
Syntax:
Options:
Sample Output:
-> ismIslSet12x
L01S2Ba 12x mode is DISABLED
L01S2Bb 12x mode is DISABLED
L01S2Bc 12x mode is DISABLED
L01S1Ba 12x mode is DISABLED
L01S1Bb 12x mode is DISABLED
L01S1Bc 12x mode is DISABLED
L01S2Aa 12x mode is DISABLED
L01S2Ab 12x mode is DISABLED
ismChassisSetMtu [mtuCap] {vlCap}
mtuCap
4=2048 bytes, 5=4096 bytes.
vlCap
1=VL0, 2=VL0,VL1, 3=VL0-VL3, 4=VL0-VL7
-> 1-> ismChassisSetMtu
L01P01 MTUCap=4(2048 bytes) VLCap=4(8 VLs)
L01P02 MTUCap=4(2048 bytes) VLCap=4(8 VLs)
L01P03 MTUCap=4(2048 bytes) VLCap=4(8 VLs)
L01P04 MTUCap=4(2048 bytes) VLCap=4(8 VLs)
L01P05 MTUCap=4(2048 bytes) VLCap=4(8 VLs)
L01P06 MTUCap=4(2048 bytes) VLCap=4(8 VLs)
L01P07 MTUCap=4(2048 bytes) VLCap=4(8 VLs)
L01P08 MTUCap=4(2048 bytes) VLCap=4(8 VLs)
L01P09 MTUCap=4(2048 bytes) VLCap=4(8 VLs)
L01P10 MTUCap=4(2048 bytes) VLCap=4(8 VLs)
L01P11 MTUCap=4(2048 bytes) VLCap=4(8 VLs)
L01P12 MTUCap=4(2048 bytes) VLCap=4(8 VLs)
