2 – Switch Command Line Interface
Groups and Commands
2-30
D000025-002 Rev. A
S
Options:
Sample Output:
NOTES:
New node name must be enclosed in quotes. Node name must be less
than 128 characters.
setIBNodeDescFormat
Changes the IB Node (SMA) description format modifier.
Syntax:
Options:
Sample Output:
NOTES:
If the format is not specified, then the current format selection value is
displayed. When the format is 0, the SMA node description is in a verbose format.
When the format is one the format is brief. The brief format is more consistent with
the CLI/GUI Port Stat port naming.
fruInfo
Displays the EEProm contents.
Syntax:
Options:
None.
-> setIBNodeDesc "SilverStorm 9080 GUID=0x00066a00da000"
IB Node (SMA) Description successfully changed to = SilverStorm 9080
setIBNodeDescFormat [format]
None.
-> setIBNodeDescFormat
Format = 0
fruInfo [slot|'-all']
[slot]
Slot that you wish to display EEProm contents. Defaults to 0 (chassis EEProm)
NOTE:The '-all' parameter performs this command against all
available slots for this device.
