2 – Switch Command Line Interface
Groups and Commands
D000025-002 Rev. A
2-71
A
Sample Output:
NOTES:
When set to 'off', all links come up normally. When set to 'ignore', links that
only come up at 1x (when they were enabled for a higher rate) are forced down.
These downed ports can be queried to aid debugging errors in the fabric.
smTrapThreshold
Set/display the urgent trap threshold (in minutes) for port auto-disable.
Syntax:
Options:
Sample Output:
NOTES:
When enabled, ports generating urgent traps at a rate higher than the
threshold will be disabled. This value can range from 10 to 100 traps/minute. Set
the value to 0 to disable this feature.
smAppearanceMsgThresh
Set/display the threshold for Appearance & Disappearance messages.
Syntax:
Options:
-> sm1xLinkMode
Mode is 'off'. Erroneous 1x links will be activated normally.
-> sm1xLinkMode ignore
-> sm1xLinkMode
Mode is 'ignore'. Erroneous 1x links will not be activated.
smTrapThreshold [threshold]
None.
-> smTrapThreshold
Trap Threshold is 0 (disabled).
-> smTrapThreshold 20
-> smTrapThreshold
Trap Threshold is 20 traps/minute.
smAppearanceMsgThresh [threshold]
None.
