2 – Switch Command Line Interface
Groups and Commands
2-90
D000025-002 Rev. A
S
Sample Output:
NOTE:
Using this command without the enable option displays current value
of the port(s). A reboot is required to activate changes made with this
command.
ismChassisSetDdrPreemphasis
Allows the user to view and set the preemphasis for all cable side DDR ports.
Syntax:
Options:
Sample Output:
-> ismChassisSetEnable
L01P01 is ENABLED
L01P02 is ENABLED
L01P03 is ENABLED
L01P04 is ENABLED
L01P05 is ENABLED
L01P06 is ENABLED
L01P07 is ENABLED.
ismChassisSetDdrPreemphasis [preemphasis]
preemphasis
port preemphasis (4 bits per SERDES on the port. Use the format 0x01010101, substituting
for the 1(s).
-> ismChassisSetDdrPreemphasis
Cable 1 DDR preemphasis=0x01010101
Cable 2 DDR preemphasis=0x01010101
Cable 3 DDR preemphasis=0x01010101
Cable 4 DDR preemphasis=0x01010101
Cable 5 DDR preemphasis=0x01010101
Cable 6 DDR preemphasis=0x01010101
Cable 7 DDR preemphasis=0x01010101
Cable 8 DDR preemphasis=0x01010101
Cable 9 DDR preemphasis=0x01010101
Cable10 DDR preemphasis=0x01010101
Cable11 DDR preemphasis=0x01010101
Cable12 DDR preemphasis=0x01010101
Cable13 DDR preemphasis=0x01010101
Cable14 DDR preemphasis=0x01010101
Cable15 DDR preemphasis=0x01010101
Cable16 DDR preemphasis=0x01010101
Cable17 DDR preemphasis=0x01010101
Cable18 DDR preemphasis=0x01010101
Cable19 DDR preemphasis=0x01010101
Cable20 DDR preemphasis=0x01010101
Cable21 DDR preemphasis=0x01010101
Cable22 DDR preemphasis=0x01010101
Cable23 DDR preemphasis=0x01010101
Cable24 DDR preemphasis=0x01010101
