3 – Virtual I/O Command Line Interface
Groups and Commands
D000025-002 Rev. A
3-87
A
ethVnic2McastRateGet
Reads the current Vnic2Mcast rate setting used during registration.
Syntax:
Options:
Sample Output:
ethVnic2McastRateSet
Modifies the Vnic2Mcast rate setting used during registration.
Syntax:
Options:
Sample Output:
NOTE:
A reboot is required to activate changes.
ethVnic2McastRateGet
None.
-> ethVnic2McastRateGet
Link rate for VNIC2 multicast groups : 3 (=> 4x or 10G)
ethVnic2McastRateSet <Vnic2Mcast rate>
Vnic2Mcast rate
The Vnic2Mcast rate setting to use. Type the command with no rate to display options.
-> ethVnic2McastRateSet
usage: ethVnic2McastRateSet <rate>
rate = 0 (Don't care), 1 (1G), 2 (1x or 2.5G), 3 (4x or 10G), 4 (12x or
30G), 5 (5G), 6 (20G), 7 (40G), 8 (60G), 9 (80G), 10 (120G),
-> ethVnic2McastRateSet 3
Successfully set link rate (3) for VNIC2 Multicast groups.
Link rate for VNIC2 multicast groups : 3 (=> 4x or 10G)
