SIGLENT
46 SSG5000X Programming Guide
3.6.3.3
Start Frequency
([:SOURce]:SWEep:STEP:STARt:FREQuency)
Command
Format
[:SOURce]:SWEep:STEP:STARt:FREQuency <freq>
[:SOURce]:SWEep:STEP:STARt:FREQuency?
Instruction
Set the start frequency for the sweep mode
Get the start frequency for the sweep mode
Parameter
Type
Float, unit: Hz, kHz, MHz, GHz, Default “Hz”
Parameter
Range
Full frequency range.
Return
Float, unit: Hz
Default
Maximum frequency
Menu
SWEEP > Step Sweep > Start Freq
Example
:SWEep:STEP:STARt:FREQuency 1 GHz
3.6.3.4
Stop Frequency
([:SOURce]:SWEep:STEP:STOP:FREQuency)
Command
Format
[:SOURce]:SWEep:STEP:STOP:FREQuency <freq>
[:SOURce]:SWEep:STEP:STOP:FREQuency?
Instruction
Set the stop frequency for the sweep mode
Get the stop frequency for the sweep mode
Parameter
Type
Float, unit: Hz, kHz, MHz, GHz, Default “Hz”
Parameter
Range
Full frequency range.
Return
Float, unit: Hz
Default
Maximum frequency
Menu
SWEEP > Step Sweep > Stop Freq
Example
:SWEep:STEP:STOP:FREQuency 1 GHz
3.6.3.5
Start Level ([:SOURce]:SWEep:STEP:STARt:LEVel)
Command [:SOURce]:SWEep:STEP:STARt:LEVel <level>