1-186
Fabric OS Reference
Telnet Commands
1
args
The command arguments description depends on event type:
star
start type:
0
= enable ports,
100
= disable ports
disable
state can be one of the following: 1 - Online, 2 - Offline, 3 - Testing, 4 - Faulty,
5 - E_Port, 6 - F_Port, 7 - Segmented.
enable
mode:
0
= normal, non-zero = loopback
ioctl
I/O control arguments. Refer to Table 1-15 for a list of ioctl code values.
Tx
&
Rx
first two header words and first payload word
reject
FC-PH reject reason
busy
FC-PH busy reason
ctin
Argument 0 is divided into two 16-bit fields:
[A]
bit map indicating validity of subsequent args
(
0001
= argument 1 is valid,
0003
= arguments 1 and 2 are valid).
[B]
ct-based service command code. Argument 1 = first word of the CT payload, if
applicable (as specified in [A]). Argument 2 = second word of the CT payload,
if applicable (as specified in [A]).
ctout
Argument 0 is divided into two 16-bit fields:
[A]
bit map indicating validity of subsequent args (
0001
= argument 1 is valid,
0003
= arguments 1 and 2 are valid).
[B]
CT command code indicating an accept (
8002
) or a reject (
8001
). If [B] is an
accept, argument 1 and 2 represents the first and second words of the CT
payload, if applicable (as specified in [A]). If [B] is a reject, argument 1
contains the CT reject reason and explanation code.
errlog
Error type (see
errShow
) create - name of the task being created
loopscn
description depends on loop state:
OLP
offline reason code, usually zero
LIP
Reason code for LIPs initiated by
FL_Port
, if the code value is 800x (x =
[1,0xc], see below), or the lower two bytes of the LIP received, if the code
value is other than 800x. Refer to Table 1-16 for a list of LIP code values.
LIM
usually zero BMP: memory address for the loop bitmap
OLD
usually zero
TMO
Encoded value of state when loop initialization timed out. This value is usually
equal to the first word of a loop initialization frame payload. Refer to
Table 1-17 for a list of TMO code values.
Table 1-13 portLogShow Command Field Descriptions (Continued)
Field
Possible Values
Summary of Contents for StorageWorks 8B - FC Entry Switch
