manualshive.com logo in svg

IDT 89HPEB383, User Manual

The IDT 89HPEB383 User Manual is available for free download. This comprehensive manual provides detailed instructions and information about operating and maintaining the product. Easily access and download this manual from our website, ensuring you have all the information you need for an optimal user experience.

Share
Download
background image

9. Error Handling > PCIe as Originating Interface

71

PEB383 User Manual

July 25, 2011

Integrated Device Technology, Inc.

Confidential - NDA Required

9.2.3

PCI Uncorrectable Data Errors

This section describes the bridge requirements for error handling when forwarding downstream 
a.non-poisoned PCIe transaction to PCI and the bridge detects an uncorrectable data error. The error is 
detected on the PCI Interface. 

9.2.3.1

Immediate Reads 

When the PEB383 forwards a read request (I/O, Memory, or Configuration) downstream, it does the 
following when it detects an uncorrectable data error on the destination interface while receiving an 
immediate response from the completer: 

1.

MDP_D bit is set in the 

“PCI Secondary Status and I/O Limit and Base Register”

 

if the S_PERESP 

bit is set in the 

“PCI Bridge Control and Interrupt Register”

2.

D_PE in the 

“PCI Control and Status Register”

 is set

3.

PCI_PERRn is asserted on the PCI Interface if the S_PERESP bit is set in the 

“PCI Bridge Control 

and Interrupt Register”

4.

UDERR bit is set in 

“PCIe Secondary Uncorrectable Error Status Register”

 

5.

Header is logged in the 

“PCIe Secondary Header Log 1 Register”

 and the SUFEP field is updated 

in the 

“PCIe Secondary Error Capabilities and Control Register”

 if UDERR Mask bit is clear in the 

“PCIe Secondary Uncorrectable Error Mask Register”

 and SUFEP is not valid

6.

Error Fatal or Non-Fatal message is generated on PCIe as per the severity level of UDERR bit in 

“PCIe Secondary Uncorrectable Error Severity Register”

 if the UDERR Mask bit is clear in 

“PCIe 

Secondary Uncorrectable Error Mask Register”

 and either SERR_EN bit is set in the 

“PCI Control 

and Status Register”

 or FTL_ERR_EN/NFTL_ERR_EN bit is set in the 

“PCIe Device Control and 

Status Register”

7.

S_SERR bit is set in the 

“PCI Control and Status Register”

 if an error message (Fatal/Non-Fatal) is 

generated and S_SERR bit is set in the 

“PCI Control and Status Register”

 

8.

FTL_ERR_DTD/NFTL_ERR_DTD bit is set in the 

“PCIe Device Control and Status Register”

For an immediate read transaction, if the PEB383 detects an uncorrectable data error on the destination 
bus it continues to fetch data until the byte count is satisfied, or the target on the destination bus ends 
the transaction. When the bridge creates the PCIe completion, it forwards it with successful completion 
status and poisons the TLP. 

9.2.3.2

Non-Posted Writes

When the PEB383 detects PCI_PERRn asserted on the PCI Interface while forwarding a non-poisoned 
non-posted write transaction from PCIe, it does the following:

1.

If the target completes the transaction immediately with a data transfer, the PEB383 generates a 
PCIe completion with Unsupported Request status to report the error to the requester

2.

PERR_AD bit is set in the 

“PCIe Secondary Uncorrectable Error Status Register”

3.

MDP_D bit in the 

“PCI Secondary Status and I/O Limit and Base Register”

 is set if S_PERESP bit 

is set in the 

“PCI Bridge Control and Interrupt Register”

Summary of Contents for 89HPEB383









































































































































































































































































Reviews:

No comments

Related manuals for 89HPEB383

Gallagher T10 Installation Note preview
T10
Brand: Gallagher Pages: 11
Magtek iDynamo 6 Installation And Operation Manual preview
iDynamo 6
Brand: Magtek Pages: 41
Magtek kDynamo Air Installation And Operation Manual preview
kDynamo Air
Brand: Magtek Pages: 34
Magtek eDynamo Installation And Operation Manual preview
eDynamo
Brand: Magtek Pages: 34
Magtek iDynamo 5 Quick Installation Manual preview
iDynamo 5
Brand: Magtek Pages: 4
Magtek ADYNAMO Manual preview
ADYNAMO
Brand: Magtek Pages: 44
Magtek DYNAMAG Installation And Operation Manual preview
DYNAMAG
Brand: Magtek Pages: 23
Hawking H-GA32T Specifications preview
H-GA32T
Brand: Hawking Pages: 2
Microdia FlashMover 16-in-1 USB2.0 Installation Manual preview
FlashMover 16-in-1 USB2.0
Brand: Microdia Pages: 2
StarTech.com PEXUSB312C3 Quick Start Manual preview
PEXUSB312C3
Brand: StarTech.com Pages: 2
EVGA GTX 285 User Manual preview
GTX 285
Brand: EVGA Pages: 6
Roger RUD-3 User Manual preview
RUD-3
Brand: Roger Pages: 7
Manhattan 150965 Quick Install Manual preview
150965
Brand: Manhattan Pages: 12
Totoku LV32P5-M User Manual preview
LV32P5-M
Brand: Totoku Pages: 48
Hegel HD2 User Manual preview
HD2
Brand: Hegel Pages: 4
TSYS RP350x User Manual preview
RP350x
Brand: TSYS Pages: 83
Lava DSerial-PCI/LP Card Quick Installation Manual preview
DSerial-PCI/LP Card
Brand: Lava Pages: 8
Hama Photo Player Operating Instruction preview
Photo Player
Brand: Hama Pages: 42

Brands by name

Popular brands

Load more brands