|
Setting/Setting Confirmation
211
•
Key-ID: Random character string
•
User-FQDN: Domain name with a user
name
Remote ID
Set ID according to the format of the
selected "Remote ID Setting".
•
IP address: IP address format
•
FQDN: Set in domain name format.
Character string can be 1~64
alphanumeric characters.
•
Key-ID: Character string can be 1~47
alphanumeric characters.
•
User-FQDN: Set in the form
"username@domainname". Character
string can be 3~160 alphanumeric
characters.
*ASCII (0x21~0x7e) characters can be
used for "FQDN", "Key-ID", "User-
FQDN" except the following: " ' ` #
\ $ = ?<space>
Sample input
IP address
: 192.0.2.222
FQDN
:
remote.example.com
Key-ID
: RemoteID-1
User-FQDN
:
adm@example.com
Not set
Encryption
Algorithms
Set the encryption algorithm to be used
for IKE phase 1.
•
AES256-CBC
•
AES192-CBC
•
AES128-CBC
•
3DES-CBC
AES256-CBC
Authentication
Algorithms
Set the authentication algorithm to be
used for IKE phase 1.
•
HMAC-SHA1
•
HMAC-SHA2-256
•
HMAC-MD5
HMAC-SHA1
Life Time (sec)
Set the validity period of the IKE SA.
Input range is from 300 to 691,200
seconds.
Use a value that is smaller
than the one set at the
destination. Rekey is done
at random between 70%
to 85% of the set lifetime.
28800
DH-Group
Set the encryption strength of the
Diffie-Hellman Key exchange.
•
768bit
•
1024bit
•
1536bit
•
2048bit
768bit
DPD-Keepalive
Set whether to use DPD-Keepalive
function for the detection of
DPD (Dead Peer
Detection)
Disabled
