1-13
Description
Use the
snmp-agent calculate-password
command to encrypt a plain-text password to generate a
cipher-text one by using the specified encryption algorithm.
When creating an SNMPv3 user, if you specify an authentication or privacy password as in cipher text,
you need to use this command to generate a cipher text password by using the specified algorithm, and
copy the generated cipher text password to use.
The generated password is related to engine ID: password generated under an engine ID can only take
effect on this engine ID.
Related commands:
snmp
-
agent usm
-
user
v3
.
SNMP agent must be enabled for you to encrypt a plain-text password.
Examples
# Use the local engine ID and the md5 algorithm to encrypt plain-text password
aaaa
.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] snmp-agent calculate-password aaaa mode md5 local-engineid
The result of the password is: B02A2E48346E2CBFFCE809C99CF1F6C
snmp-agent community
Syntax
snmp
-
agent community
{
read
|
write
}
community
-
name
[ [
acl
acl-number
] [
mib-view
view-name
] ]*
undo snmp
-
agent community
community
-
name
View
System view
Parameters
read
: Specifies that the community to be created has read-only permission to MIB objects.
Communities of this type can only query MIBs for device information.
write
: Specifies that the community to be created has read-write permission to MIB objects.
Communities of this type are capable of configuring devices.
community-name
: Name of the community to be created, a string of 1 to 32 characters.
acl-number
: ID of the ACL to be applied to the community, in the range 2000 to 2999. Using basic ACL
can restrict the source addresses of SNMP messages, namely, permitting or refusing the SNMP
messages with specific source addresses, thus restricting access between the NMS and the agent.
view-name
: MIB view name, a string of 1 to 32 characters.
Summary of Contents for 5500-EI PWR
