16-38
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Chapter 16 Fragmenting and Interleaving Real-Time and Nonreal-Time Packets
FRF.12 Fragmentation
Feature History for FRF.12 Fragmentation
FRF.12 over Multilink Frame Relay
To remove and re-attach service policies from the FRF.12 over Multilink Frame Relay configuration
when traffic is running, use
Example 16-5
. In
Example 16-5
, you remove the map-class, and then remove
the service policy.
Example 16-5 Remove the Map-Class Before Removing the Service Policy
int mfr2001.1
no frame-relay class mfr
no service-policy out mfr1
int mfr2001.1
service-policy out mfr1
frame-relay class mfr
When traffic is stopped, you can remove and re-attach service policies using
Example 16-6
and
Example 16-7
.
Example 16-6 Removing and Re-attaching the Service Policy
int mfr2001.1
no service-policy out mfr1
int mfr2001.1
service-policy out mfr1
Example 16-7 Remove the Service Policy Before Removing the Map-Class.
int mfr2001.1
no service-policy out mfr1
no frame-relay class mfr
int mfr2001.1
frame-relay class mfr
service-policy out mfr1
Cisco IOS Release
Description
Required PRE
Release 12.0(23)SX
The PVC-based FRF.12 Fragmentation feature was
introduced on the router.
PRE1
Release 12.0(27)S
This feature was enhanced to allow interface-based
FRF.12 fragmentation.
PRE1
Release 12.2(27)SBB
This feature was introduced on the PRE2 to allow
PVC-based and interface-based FRF.12 fragmentation
only.
PRE2
Release 12.2(31)SB2
This feature was introduced on the PRE3.
PRE3