DIAGnostic:CHECksum?
DIAGnostic:CHECksum?
performs a checksum operation on Flash Memory. A
returned value of
1
indicates that Flash memory contents are correct. A returned
value of
0
indicates that the Flash Memory is corrupted, or has been erased.
Comments
•
Returned Value: Returns
1
or
0
. The C-SCPI type returned is int16.
Usage
DIAG:CHEC?
Checksum Flash Memory, return 1 for OK,
0 for corrupted.
DIAGnostic:COMMand:SCPWRITE
DIAGnostic:COMMand:SCPWRITE <
reg_addr
>,<
reg_data
>
writes data to
custom Signal Conditioning Plug-on registers. Use to control custom SCPs created
using the HP E1504 Breadboard SCP.
Parameters
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
<
reg_addr
>
numeric (int32)
0 - 65,535
none
<
reg_data
>
numeric (int32)
0 - 65,535
none
Comments
•
See the Register Programming Section of your SCP Manual for parameter values.
•
Related Commands:
DIAGnostic:QUERy:SCPREAD?
Usage
DIAG:COMM:SCPWRITE 696,3
For HP E1505 Current Source, set channel 7
on SCP 2 to 488 mA with output enabled.
DIAGnostic
Chapter 5
HP E1313/E1413 Command Reference 189
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com