Generate Certificate Request:
This feature allows you to create a Certificate Signing Request (CSR) that can be sent to a Certificate Author-
ity to request a signed certificate. This function creates a certificate and a private key on the LANTIME. The
location for the CSR is
"/mnt/flash/data/https.req"
, the matching key is stored at
"/mnt/flash/data/https.req.pk"
.
Hint:
If you has generated the certificate submitted to the certification
authority, via the function "Generate Certificate Request", the
appropriate key for this certificate is already stored under
"/mnt/flash/data/https.req.pk"
.
After uploading the signed certificate,
this previously generated private key will be used.
If the submitted and signed certificate was not generated on the LANTIME,
then the PEM file must contain the private key and the certificate itself.
The content of the private key starts with
"—–BEGIN RSA PRIVATE KEY—–"
and ends with
"—–END RSA PRIVATE KEY—–"
the certificate itself starts with
"—–BEGIN CERTIFICATE—–"
and ends with
"—–END CERTIFICATE—–".
This example is an excerpt from a PEM file:
---BEGIN RSA PRIVATE KEY---
MIICXQIBAAKBgQC6Bqxzfp3bNtEYyiRIAbQAIsHbl8XbIXWB
...
aiLbmu7N3TEdWVDgro8kMuQC/Ugkttx7TdJJbqJoVsF5
---END RSA PRIVATE KEY---
---BEGIN CERTIFICATE---
MIIEJTCCA46gAwIBAgIJANF4dlCI2saDMA0GCSqGSIb3DQEBMQswCQYD
...
ekZ970dAaPca
---END CERTIFICATE---
66
Date: 2nd July 2020
LANTIME CPU Expansion Shelf
Summary of Contents for LCES
Page 2: ......