118165-001 REV. A
475 Wireless Boulevard • Hauppauge, New York 11788, USA • www.spellmanhv.com • T:+1 631.630.3000 • F:+1 631.435.1620
74
4.5.13
Set Baud Rate
Description:
The host requests that the firmware change the Baud Rate of the
serial port. Note that the command response is sent at the old baud
rate, and the host should wait 500msec before sending another
command at the new baud rate to allow the new baud rate to take
effect.
Direction:
Host to supply
Syntax:
<STX><07><,><ARG><,><CSUM><ETX>
Where:
<ARG> = 2 or 5 in ASCII format, 2 = 19200, 5 = 115200
Example:
<STX>07,1,<CSUM><ETX>
Response:
<STX><07><,><$><,><CSUM><ETX>
(Response sent at old baud rate)