Programming
101
Modero G4 Touch Panels - Configuration and Programming
Intercom Commands (Cont.)
^ICM-MICLEVEL
Sets the microphone level during an intercom call (0 to 100).
Syntax:
"^ICM-MICLEVEL"
Variables:
Level = 0-100
Example:
SEND_COMMAND TP1, "^ICM-MICLEVEL,40"
Sets the microphone level to 40.
^ICM-MUTEMIC
Sets the state of the microphone on a panel to muted (1) or unmuted (0). At the start of each
call, the microphone starts out unmuted.
Syntax:
SEND_COMMAND <DEV>, "^ICM-MICLEVEL,<value>"
Example:
SEND_COMMAND TP1, "^ICM-MUTEMIC,1"
^ICM-SPEAKERLEVEL
Sets the speaker level during an intercom call (0 to 100).
Syntax:
SEND_COMMAND <DEV>, "^ICM-SPEAKERLEVEL,<value>"
Variables:
Level = 0-100.
Example:
SEND_COMMAND TP1, "^ICM-SPEAKERLEVEL,55"
^ICM-TALK
Intercom modify command.
Syntax:
"'^ICM-TALK'"
Example:
SEND_COMMAND TP1,"'^ICM-TALK'"
^IIC
Intercom incoming call.
Syntax:
“’^IIC’
Notifies the panel (specifically the AMX BT Handset accessory) that an intercom call is
coming in. This is to enable the accessory to ring.
^IOC
Intercom outgoing call.
Syntax:
“’^IOC’
Notifies the panel that an intercom call is outgoing. This is to enable any headset accessories
for the appropriate operation.