DXS-3326GSR Stackable Gigabit Layer 3 Switch
Example Usage:
To configure the IGMP for the IP interface System.
DXS-3326GSR:4#config igmp all version 1 state enable
Command: config igmp all version 1 state enable
Success.
DXS-3326GSR:4#
show igmp
Used to display the IGMP configuration for the Switch of for a
specified IP interface.
Syntax
show igmp {ipif <ipif_name 12>}
Description
This command will display the IGMP configuration for the Switch
if no IP interface name is specified. If an IP interface name is
specified, the command will display the IGMP configuration for
that IP interface.
Parameters
<ipif_name 12>
−
The name of the IP interface for which the
IGMP configuration will be displayed.
Restrictions None.
Purpose
Example Usage:
To display IGMP configurations:
DXS-3326GSR:4#show igmp
Command: show igmp
IGMP Interface Configurations
Interface IP Address/Netmask Ver- Query Maximum Robust- Last State
sion Response ness Member
Time Value Query
Interval
------------ --------------- ---- ------ -------- ------- ----- -------
System 10.90.90.90/8 1 125 10 2 1 Enabled
p1 20.1.1.1/8 1 125 10 2 1 Enabled
Total Entries: 2
DXS-3326GSR:4#
145
