DXS-3326GSR Stackable Gigabit Layer 3 Switch
create access_profile
•
tcp
−
Specifies that the Switch will examine each frames
Transport Control Protocol (TCP) field.
•
src_port_mask <hex 0x0-0xffff>
−
Specifies a TCP port
mask for the source port.
•
dst_port_mask <hex 0x0-0xffff>
−
Specifies a TCP port
mask for the destination port.
•
src_port_mask <hex 0x0-0xffff>
−
Specifies a UDP port
mask for the source port.
•
user_define <hex 0x0-0xfffffff>
−
Enter a hexidecimal
value that will identify the protocol to be discovered in the
packet header.
•
port <portlist>
- Specifies a port or range of ports to be configured.
The port list is specified by listing the lowest switch number and
the beginning port number on that switch, separated by a colon.
Then the highest switch number, and the highest port number of
the range (also separated by a colon) are specified. The beginning
and end of the port list range are separated by a dash. For
•
flag_mask [ all | {urg | ack | psh | rst | syn | fin}]
– Enter the
appropriate flag_mask parameter. All incoming packets have
TCP port numbers contained in them as the forwarding
criterion. These numbers have flag bits associated with them
which are parts of a packet that determine what to do with
the packet. The user may deny packets by denying certain
flag bits within the packets. The user may choose between
all
,
urg
(urgent),
ack
(acknowledgement),
psh
(push),
rst
(reset),
syn
(synchronize) and
fin
(finish).
•
udp
−
Specifies that the Switch will examine each frame’s
Universal Datagram Protocol (UDP) field.
•
dst_port_mask <hex 0x0-0xffff>
−
Specifies a UDP port
mask for the destination port.
•
protocol_id
−
Specifies that the Switch will examine each
frame’s Protocol ID field.
packet_content_mask
– Specifies that the Switch will mask
the packet header beginning with the offset value specified
as follows:
•
offset_0-15
– Enter a value in hex form to mask the
packet from the beginning of the packet to the 15
th
byte.
•
offset_16-31
- Enter a value in hex form to mask the
packet from byte 16 to byte 31.
•
offset_32-47
- Enter a value in hex form to mask the
packet from byte 32 to byte 47.
•
offset_48-63
- Enter a value in hex form to mask the
packet from byte 48 to byte 63.
•
offset_64-79
- Enter a value in hex form to mask the
packet from byte 64 to byte 79.
229
