DXS-3326GSR Stackable Gigabit Layer 3 Switch
show authen application
Purpose
Used to display authentication methods for the various applications
on the Switch.
Syntax
show authen application
Description
This command will display all of the authentication method lists (login,
enable administrator privileges) for switch configuration applications
(console, telnet, web) currently configured on the Switch.
Parameters None.
Restrictions None.
Example usage:
To display the login and enable method list for all applications on the Switch:
DXS-3326GSR:4#show authen application
Command: show authen application
Application Login Method List Enable Method List
---------------- ------------------ ------------------------
Console default default
Telnet Trinity default
SSH default default
HTTP default default
DXS-3326GSR:4#
create authen server_host
Purpose
Used to create an authentication server host.
Syntax
create authen server_host <ipaddr> protocol [tacacs | xtacacs
| | radius] {port <int 1-65535> | key [<key_string 254> |
none] | timeout <int 1-255> | retransmit < 1-255>}
Description
This command will create an authentication server host for the
TACACS/XTACACS/ and RADIUS security protocols on
the Switch. When a user attempts to access the Switch with
authentication protocol enabled, the Switch will send authentication
packets to a remote TACACS/XTACACS/ or RADIUS
server host on a remote host. The TACACS/XTACACS/
or RADIUS server host will then verify or deny the request and
return the appropriate message to the Switch. More than one
authentication protocol can be run on the same physical server host
but, remember that TACACS/XTACACS/ and RADIUS
are separate entities and are not compatible with each other. The
maximum supported number of server hosts is 16.
176
