104
Eth0/2 U 32768 1
Eth0/3 U 63 1
Table 25 Command output
Field
Description
Loadsharing Type
Load sharing type:
•
Shar
—Load sharing.
•
NonS
—Non-load sharing.
Port Status
Port state: Selected or unselected.
Flags
LACP state flags:
•
A
—LACP is enabled.
•
B
—LACP short timeout.
•
C
—The sending system detects that the link is aggregatable.
•
D
—The sending system detects that the link is synchronized.
•
E
—The sending system detects that the incoming frames are collected.
•
F
—The sending system detects that the outgoing frames are distributed.
•
G
—The sending system receives frames in default state.
•
H
—The sending system receives frames in expired state.
Aggregation Interface
Name of the aggregate interface.
Aggregation Mode
Mode of the aggregation group:
•
Static for static aggregation.
•
Dynamic for dynamic aggregation.
System ID
Local system ID, containing the system LACP priority and the system MAC
address.
Local
Information about the local end.
Port
Port type and number.
Status
Port state: selected or unselected.
Priority
Port aggregation priority.
Oper-Key Operational
key.
Flag
LACP protocol state flag.
Remote
Information about the remote end.
Actor
Local port type and number.
Partner
Remote port index.
enable snmp trap updown
Use
enable snmp trap updown
to enable linkUp/linkDown trap generation for the aggregate
interface.
Use
undo enable snmp trap updown
to disable linkUp/linkDown trap generation for the aggregate
interface.
Syntax
enable snmp trap updown
undo enable snmp trap updown
