72
Examples
# In MSTP mode, enable the spanning tree feature globally.
<Sysname> system-view
[Sysname] stp enable
# In MSTP mode, disable the spanning tree feature on port Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] undo stp enable
Related commands
stp mode
stp loop-protection
Use
stp loop-protection
to enable the loop guard function on the ports.
Use
undo stp loop-protection
to disable the loop guard function on the ports.
Syntax
stp loop-protection
undo stp
loop-protection
Default
The loop guard function is disabled.
Views
Ethernet interface view, port group view, Layer 2 aggregate interface view
Default command level
2: System level
Usage guidelines
The following matrix shows the command and hardware compatibility:
Hardware
Command compatibility in Layer 2
aggregate interface view
MSR800 Yes
MSR 900
No
MSR900-E Yes
MSR 930
Yes
MSR 20-1X
No
MSR 20
No
MSR 30
Yes
MSR 50
Yes
MSR 2600
Yes
MSR3600-51F Yes
Configured in Ethernet interface view, the setting takes effect only on the interface.
Configured in port group view, the setting takes effect on all member ports in the port group.
