140
Table 32 Command output
Field Description
LLDP tlv-config of port 1
Advertisable optional TLVs of port 1.
NAME TLV
type.
STATUS
Indicates whether a specific type of TLV is sent through a port.
DEFAULT
Indicates whether a specific type of TLV is sent through a port by
default.
Basic optional TLV
Basic TLVs:
•
Port
description
TLV.
•
System
name
TLV.
•
System
description
TLV.
•
System
capabilities
TLV.
•
Management
address
TLV.
IEEE 802.1 extended TLV
IEEE 802.1 organizationally specific TLVs:
•
Port VLAN ID TLV.
•
Port and protocol VLAN ID TLV.
•
VLAN name TLV.
IEEE 802.3 extended TLV
IEEE 802.3 organizationally specific TLVs:
•
MAC-Physic
TLV.
•
Power via MDI TLV.
•
Link
aggregation
TLV.
•
Maximum frame size TLV.
LLDP-MED extend TLV
LLDP-MED TLVs:
•
Capabilities
TLV.
•
Network
Policy
TLV.
•
Extended
Power-via-MDI
TLV.
•
Location
Identification
TLV.
•
Inventory TLV, including hardware revision TLV, firmware revision
TLV, software revision TLV, serial number TLV, manufacturer
name TLV, model name TLV, and asset id TLV.
lldp admin-status
Use
lldp admin-status
to specify the LLDP operating mode for a port or all ports in a port group.
Use
undo lldp admin-status
to restore the default LLDP operating mode.
Syntax
lldp admin-status
{
disable
|
rx
|
tx
|
txrx
}
undo lldp admin-status
Default
The LLDP operating mode is
TxRx
.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view, port group view
Default command level
2: System level
