110
Hardware Command
compatibility
MSR 20
No
MSR 30
Yes
MSR 50
Yes
MSR 2600
Yes
MSR3600-51F Yes
When the number of ports eligible for becoming Selected ports exceeds the maximum number of
Selected ports allowed in an aggregation group, changing the aggregation priority of a port might
affect the aggregation state of the ports in the aggregation group.
Examples
# Set the aggregation priority of port Ethernet 1/1 to 64.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] link-aggregation port-priority 64
mtu
Use
mtu
to set the MTU of a Layer 3 aggregate interface or subinterface.
Use
undo mtu
to restore the default setting.
Syntax
mtu
size
undo mtu
Default
The MTU for Layer 3 aggregate interfaces and subinterfaces is 1500 bytes.
Views
Layer 3 aggregate interface view, Layer 3 aggregate subinterface view
Default command level
2: System level
Parameters
size
: Specifies the MTU in the range of 46 to 1560 bytes.
Examples
# Set the MTU of Layer 3 aggregate interface Route-Aggregation 1 to 1430 bytes.
<Sysname> system-view
[Sysname] interface route-aggregation 1
[Sysname-Route-Aggregation1] mtu 1430
Related commands
display interface
port link-aggregation group
Use
port link-aggregation group
to assign the Ethernet interface to the specified aggregation
group.