36
Super VLAN configuration commands
The following matrix shows the super VLAN configuration commands and hardware compatibility:
Hardware
Super VLAN compatibility
MSR800 No
MSR 900
No
MSR900-E No
MSR 930
No
MSR 20-1X
No
MSR 20
No
MSR 30
Available only on fixed Layer 2 Ethernet interfaces of
MSR 30-11E and MSR 30-11F routers and on MSR
30-10 and MSR 30-11 routers installed with XMIM Layer
2 switching modules.
MSR 50
No
MSR 2600
No
MSR3600-51F Yes
display supervlan
Use
display supervlan
to display the mapping between a super VLAN and sub-VLANs, and to
display information about these VLANs.
Syntax
display supervlan
[
supervlan-id
] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
Views
Any view
Default command level
1: Monitor level
Parameters
supervlan-id
: Specifies a super VLAN ID in the range of 1 to 4094.
|
: Filters command output by specifying a regular expression. For more information about regular
expressions, see
Fundamentals Configuration Guide
.
begin
: Displays the first line that matches the specified regular expression and all lines that follow.
exclude
: Displays all lines that do not match the specified regular expression.
include
: Displays all lines that match the specified regular expression.
regular-expression
: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the mapping between a super VLAN and sub-VLANs.
<Sysname> display supervlan 2
Supervlan ID : 2
