149
port-description
: Advertises port description TLVs.
system-capability
: Advertises system capabilities TLVs.
system-description
: Advertises system description TLVs.
system-name
: Advertises system name TLVs.
dot1-tlv
: Advertises IEEE 802.1 organizationally specific LLDP TLVs.
port-vlan-id
: Advertises port VLAN ID TLVs.
protocol-vlan-id
[
vlan-id
]: Advertises port and protocol VLAN ID TLVs. The
vlan-id
argument
specifies a VLAN ID in the TLVs to be advertised. The VLAN ID is in the range of 1 to 4094, and the
default is the lowest VLAN ID on the port.
vlan-name
[
vlan-id
]: Advertises VLAN name TLVs. The
vlan-id
argument specifies a VLAN ID in the
TLVs to be advertised. The VLAN ID is in the range of 1 to 4094, and the default is the lowest VLAN
ID on the port.
dot3-tlv
: Advertises IEEE 802.3 organizationally specific LLDP TLVs.
link-aggregation
: Advertises link aggregation TLVs.
mac-physic
: Advertises MAC/PHY configuration/status TLVs.
max-frame-size
: Advertises maximum frame size TLVs.
power
: Advertises power via MDI TLVs and power stateful control TLVs.
med-tlv
: Advertises LLDP-MED TLVs.
capability
: Advertises LLDP-MED capabilities TLVs.
inventory
: Advertises the following TLVs: hardware revision, firmware revision, software revision,
serial number, manufacturer name, model name, and asset ID.
location-id
: Advertises location identification TLVs.
civic-address
: Inserts the normal address information about the network device in location
identification TLVs .
device-type
: Sets a device type value in the range of 0 to 2. Value 0 specifies a DHCP server. Value
1 specifies a switch. Value 2 specifies an LLDP-MED endpoint.
country-code
: Sets a country code, corresponding to ISO 3166.
{
ca-type ca-value
}&<1-10>: Configures address information, where
ca-type
represents the address
information type value in the range of 0 to 255,
ca-value
represents address information, a string of 1
to 250 characters, and &<1-10> indicates that you can enter up to 10 parameters.
elin-address
: Inserts telephone numbers for emergencies in location identification TLVs.
tel-number
: Sets the telephone number for emergencies, a string of 10 to 25 characters.
network-policy
: Advertises network policy TLVs.
power-over-ethernet
: Advertises extended power-via-MDI TLVs.
Usage guidelines
To enable the device to advertise LLDP-MED TLVs, you must first enable it to advertise LLDP-MED
capabilities TLVs.
To disable the device from advertising LLDP-MED capabilities TLVs, you must first disable it from
advertising other LLDP-MED TLVs.
To disable the device from advertising MAC/PHY configuration/status TLVs, you must first disable it
from advertising LLDP-MED capabilities TLVs.
If you enable the device to advertise LLDP-MED capabilities TLVs, you also enable it to advertise
MAC/PHY configuration/status TLVs.
