124
Related commands
•
display garp timer
•
garp timer join
•
garp timer leaveall
garp timer leaveall
Use
garp timer leaveall
to set the GARP LeaveAll timer.
Use
undo garp timer leaveall
to restore the default. This might fail if the default is beyond the valid
value range for the LeaveAll timer.
Syntax
garp timer leaveall timer-value
undo garp timer leaveall
Default
The LeaveAll timer is 1000 centiseconds.
Views
System view
Default command level
2: System level
Parameters
timer-value
: Specifies the Leaveall timer (in centiseconds), which must be a multiple of 5 and range
from the maximum Leave timer on the device (exclusive) to 32765 (inclusive).
Usage guidelines
To keep the dynamic VLANs learned through GVRP stable, do not set the LeaveAll timer smaller
than its default value.
Examples
# Set the leaveall timer to 2000 centiseconds, assuming that the Leave timer on every port is set to
60 centiseconds.
<Sysname> system-view
[Sysname] garp timer leaveall 2000
Related commands
•
display garp timer
•
garp timer leave
gvrp
Use
gvrp
to enable GVRP.
Use
undo gvrp
to disable GVRP.
Syntax
gvrp
undo gvrp
