460 XML API basetype properties
elem-status
string
The SES status that corresponds to the PHY status.
•
Disabled
: Critical condition is detected.
•
Error
: Unrecoverable condition is detected. Appears only if there is a
firmware problem related to PHY definition data.
•
OK
: Element is installed and no error conditions are known.
•
Non-critical
: Non-critical condition is detected.
•
Not Used
: Element is not installed in enclosure.
•
Unknown
: Either:
• Sensor has failed or element status is not available. Appears only if an
I/O module indicates it has fewer PHYs than the reporting I/O module,
in which case all additional PHYs are reported as unknown.
• Element is installed with no known errors, but the element has not been
turned on or set into operation.
elem-status-
numeric
string
Numeric equivalents for
elem-status
values.
•
0: Error
•
1: OK
•
2: Disabled
•
3: Non-critical
•
4: Error
•
5: Not Used
•
6: Unknown
•
7: Unknown
•
8: Unknown
elem-disabled
string
•
Enabled
: PHY is enabled.
•
Disabled
: PHY is disabled.
elem-disabled-
numeric
string
Numeric equivalents for
elem-disabled
values.
•
0: Enabled
•
1: Disabled
elem-reason
string
More information about the status value.
•
Blank if
elem-status
is
OK
.
•
Error count interrupts
: PHY disabled because of error-count
interrupts.
•
Externally disabled
: PHY disabled externally via serial debug port.
•
PHY control
: PHY disabled by a SES control page as a result of action by
a Storage Controller or user.
•
Not ready
: PHY is enabled but not ready. Appears for SC-1 PHYs when
the partner I/O module is not installed. Appears for Drive, SC-1, or Ingress
PHYs when a connection problem exists such as a broken connector.
•
Drive removed
: PHY disabled because drive slot is empty.
•
Unused - disabled by default
: PHY is disabled by default because
it is not used.
•
Excessive PHY changes
: PHY is disabled because of excessive PHY
change counts.
Table 67
sas-status-controller-a properties (continued)
Name
Type
Description
Summary of Contents for P2000 G3
