420 XML API basetype properties
iscsi-parameters
Properties
Example
# show iscsi-parameters
...
<OBJECT basetype="iscsi-parameters" name="iscsi-parameter" oid="1" format="pairs">
<PROPERTY name="chap" type="string">Disabled</PROPERTY>
<PROPERTY name="chap-numeric" type="string">0</PROPERTY>
<PROPERTY name="jumbo-frames" type="string">Enabled</PROPERTY>
<PROPERTY name="jumbo-frames-numeric" type="string">1</PROPERTY>
<PROPERTY name="isns" type="string">Disabled</PROPERTY>
<PROPERTY name="isns-numeric" type="string">0</PROPERTY>
<PROPERTY name="isns-ip" type="string">0.0.0.0</PROPERTY>
Table 43
iscsi-parameters properties
Name
Type
Description
chap
string
Shows whether Challenge-Handshake Authentication Protocol (CHAP) is
enabled.
•
Enabled
: CHAP is enabled.
•
Disabled
: CHAP is disabled. This is the default.
chap-numeric
string
Numeric equivalents for
chap
values.
•
0: Disabled
•
1: Enabled
jumbo-frames
string
Shows whether support for jumbo frames is enabled.
•
Enabled
: Jumbo-frame support is enabled.
•
Disabled
: Jumbo-frame support is disabled. This is the default.
jumbo-frames-
numeric
string
Numeric equivalents for
jumbo-frames
values.
•
0: Disabled
•
1: Enabled
isns
string
Shows whether support for Internet Storage Name Service (iSNS) is enabled.
•
Enabled
: iSNS is enabled.
•
Disabled
: iSNS is disabled. This is the default.
isns-numeric
string
Numeric equivalents for
isns
values.
•
0: Disabled
•
1: Enabled
isns-ip
string
Address of the iSNS server. The default address is all zeroes.
isns-alt-ip
string
Address of the alternate iSNS server. The default address is all zeroes.
iscsi-speed
string
iSCSI host port link speed.
•
auto
: The proper speed is auto-negotiated. This is the default.
•
1Gbps
: The speed is forced to 1 Gbit/sec, overriding a downshift that can
occur during auto-negotiation with 1-Gbit/sec HBAs. This setting does not
apply to 10-Gbit/sec HBAs.
iscsi-speed-
numeric
string
Numeric equivalents for
iscsi-speed
values.
•
0: auto
•
1: 1Gbps
iscsi-ip-
version
uint8
iSCSI IP version.
•
4
: iSCSI host port addresses use IPv4 format. This is the default.
•
6
: iSCSI host port addresses use IPv6 format.
Summary of Contents for P2000 G3
