Programming Manual MSO/UPO2000 Series
50 / 156
Instruments.uni-trend.com
Over-amplitude Trigger
:TRIGger:WINDow:SLOPe
Command format
：
:TRIGger:WINDow:SLOPe {POSitive|NEGative|ALTernation}
:TRIGger:WINDow:SLOPe?
Functional description
：
This command is used to set edge type of trigger source, which is POSitive (rising edge), NEGative (falling
edge) and ALTernation (rising/falling edge).
Return format
：
Query returns edge type of trigger souece {POSitive|NEGative|ALTernation}.
For example
：
:TRIGger:WINDow:SLOP POS
Set window trigger to rising edge.
:TRIGger:WINDow:SLOP?
Query returns POS.
:TRIGger:WINDow:LEVel
Command format
：
:TRIGger:WINDow:LEVel {LOW | HIGH | LH }
:TRIGger:WINDow:LEVel?
Functional description
：
This command is used to set level mode of window trigger.
Return format
：
Query returns {LOW | HIGH | LH }.
For example
：
:TRIGger:WINDow:LEV HIGH
Set window trigger to HIGH.
:TRIGger:WINDow:LEV?
Query returns HIGH.
:TRIGger:WINDow:TIME
Command format
：
:TRIGger:WINDow:TIME <time>
:TRIGger:WINDow:TIME?
Functional description
：
This command is used to set time interval of window trigger.
Return format
：
Query returns the current time interval, unit is s.
For example
：
:TRIGger:WINDow:TIME 1
Set time interval of window trigger to 1s.
:TRIGger:WINDow:TIME?
Query returns 1.000e000.
