Programming Manual MSO/UPO2000 Series
99 / 156
Instruments.uni-trend.com
For example
：
:SBUS
:CANFD
:ID "X00X00X1"
Set
ID identifier frame data of CAN –FD bus to X00X00X1.
:SBUS:
CANFD
:ID?
Query returns X00X00X1.
:SBUS:CANFD:DATA:LEN
Command format
：
:SBUS
:CANFD
:DATA:LEN <length>
:SBUS
:CANFD
:DATA:LEN?
Functional description
：
This command is used to set
trigger data length of CAN-FD bus of the oscilloscope. It can take value from
1~16.
Return format
：
Query returns trigger data length of CAN-FD bus of the oscilloscope, it is integer data.
For example
：
:SBUS
:CANFD
:DATA:LEN 2
Set
trigger data length of CAN-FD bus to 2 bytes.
:SBUS
:CANFD
:DATA:LEN?
Query returns 2.
:SBUS:CANFD:DATA
Command format
：
:SBUS
:CANFD
:DATA <string>
:SBUS
:CANFD
:DATA?
Functional description
：
This command is used to set
DATA of CAN-FD bus of the oscilloscope. Binary character string data
presented by parameter is 0, 1 or X. X represents unsure. And its rang is related to the value set by
instruction setting value *8bits :SBUS:CANFD:DATA:LEN, the rang is
0x0~0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF.
Return format
：
Query returns binary character data.
For example
：
:SBUS
:CANFD
:DATA "X00X00X1"
Set CAN-FD bus DATA to X00X00X1
:SBUS
:CANFD
:DATA?
Query returns X00X00X1
:SBUS:CANFD:DATA:OFFSet:CTL
Command format
：
:SBUS
:CANFD
:DATA
:OFFSet:CTL
{ {1|ON} | {0|OFF} }
:SBUS
:CANFD
:DATA
:OFFSet:CTL
?
Functional description
：
This command is used to turn on/off CAN-FD bus DATA byte offset of the oscilloscope.
Return format
：
